多孔金属有机框架材料作为锂金属负极保护层助力长寿命锂氧气电池

在众多能源储存系统中,锂氧气电池以其高达3500 Wh·kg^-1的理论能量密度有望在性能上超越商用锂离子电池.然而,在电池充放电过程中,金属锂不可控的枝晶生长和严重的腐蚀问题极大地阻碍了锂氧气电池的发展.为了解决以上问题,制备了一种具有高比表面积、丰富孔道结构的金属有机框架材料（MOF-801）,并将其设计成金属锂负极的保护层应用在锂氧气电池中.在本工作中,成功合成了具有高达762.9 m²·g^-1比表面积,边长约为800 nm的立方体状纯净MOF-801材料.并且这种材料表现出对于有机电解液体系（四乙二醇二甲醚1 mol·L^-1三氟甲基磺酸锂）和强还原性的金属锂都具有很好的稳定性.得益于该材料丰富的孔道结构以及高比表面积,锂离子得以更均匀地分布在电极表面促进金属锂均匀沉积,有效避免了由于枝晶刺破隔膜而导致的短路甚至火灾事故.此外,MOF-801保护层本身的阻隔作用和材料捕捉水的特性可以帮助减少污染物质（水、氧气、强氧化性物质等）的穿梭效应带来的副反应,缓解锂氧气电池中金属锂负极的腐蚀情况.因此,将经过保护的金属锂组装成的对称电池进行测试,循环寿命长达800 h,同时充/放电过电势仅为0.023 V（未经保护的电池寿命仅为254 h,最终充/放电过电势高达5 V）,且循环阻抗大大降低,证明了这种策略有效地稳定了金属锂/电解液界面.将经过MOF材料保护的电极实际应用在锂氧气电池中,在限容量1000 mAh·g^-1,限电流500 mA·g^-1条件下,可以实现长达170圈的稳定长寿命的循环（是未经保护的电池寿命的2.88倍）.使用MOF-801保护层的锂氧气电池还表现出了高达8935 mAh·g^-1的高比容量.因此,本工作所报道的保护层策略为未来的碱金属空气电池负极保护领域提供了新颖的视角.     

In-situ polymerized cross-linked binder for cathode in lithium-sulfur batteries

Volume expansion and polysulfide shuttle effect are the main barriers for the commercialization of lithium-sulfur(Li-S) battery.In this work,we in-situ polymerized a cross-linked binder in sulfur cathode to solve the aforementioned problems using a facile method under mild conditions.Polycarbonate diol(PCDL),triethanolamine(TEA) and hexamethylene diisocyanate(HDI) were chosen as precursors to prepare the cross-linked binder.The in-situ polymerized binder(PTH) builds a strong network in sulfur cathode,which could restrain the volume expansion of sulfu r.Moreover,by adopting functional groups of oxygen atoms and nitrogen atoms,the binder could effectively facilitate transportation of Li-ion and adsorb polysulfide chemically.The Li-S battery with bare sulfur and carbon/sulfur composite cathodes and cross-linked PTH binder displays much better electrochemical performance than that of the battery with PVDF.The PTH-bare S cathode with a mass loading of 5.97 mg/cm^2 could deliver a capacity of 733.3 mAh/g at 0.2 C,and remained 585.5 mAh/g after 100 cycles.This in-situ polymerized binder is proved to be quite effective on restraining the volume expansion and suppressing polysulfide shuttle effect,then improving the electrochemical performance of Li-S battery.     

Flame retardancy and smoke suppression of silicone foams with microcapsulated aluminum hypophosphite and zinc borate

The flame‐retardant microcapsules were successfully fabricated with an aluminum hypophosphite (AHP) core. Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) were used to verify that AHP was encapsulated in the microcapsules, and thermogravimetry analysis showed that microencapsulated AHP (MAHP) possessed higher thermal stability than that of AHP. Then, a flame‐retardant and smoke suppression system for silicone foams (SiFs) was obtained through a synergistic effect of MAHP and zinc borate (2ZnO·3B₂O₃·3.5H₂O). The mechanical properties, flame retardance, and smoke suppression of SiFs with MAHP and zinc borate were tested using the tensile test, limiting oxygen index (LOI) test, UL‐94 test, and cone calorimeter test. The mechanical properties indicated that the tensile strength and elongation at break of SiFs could evidently improve with the incorporation of MAHP. Compared with pure SiF, SiF8 with 4.5‐wt% MAHP and 1.5‐wt% zinc borate could achieve an LOI value of 30.7 vol% and an UL‐94 V‐0 rating, the time to ignition amplified almost six times, the peak heat release rate and total heat release were 51.10% and 46.00% less than that of pure SiF, respectively, the fire performance index increased nearly 13 times, and the fire growth index value was only 13.18% of pure SiF. Moreover, the partial substitution of zinc borate imparted a substantial improvement in both flame retardancy and smoke suppression. Especially, the peak smoke production rate and total smoke production of SiF8 were merely 38.46% and 38.84% of pure SiF.     

Separable convolution template (SCT) background prediction accelerated by CUDA for infrared small target detection

This paper presents a novel background prediction method for infrared small target detection (ISTD). Using a separable convolution template (SCT) to accelerate the traditional background prediction by graphic processing unit (GPU), the new method provides a significant improvement in the prediction speed, which enables the prediction process in real time. And experimental results show its high efficiency and practical application over previous work. The mathematical approach proposed here could be extended to accelerate the applications referred to image convolutions not only to the infrared field.     

Gradient‐based solvent suppression methods on a benchtop spectrometer

Benchtop NMR emerges as an appealing alternative to widely extend the scope of NMR spectroscopy in harsh environments and for on‐line monitoring. Obviously, the use of low‐field magnets induces a dramatic reduction of the spectral resolution leading to frequent peak overlaps. This issue is even more serious because applications such as chemical process monitoring involve the use of non‐deuterated solvents, leading to intense and broad peaks overlapping with the signals of interest. In this article, we highlight the need for efficient suppression methods compatible with flowing samples, which is not the case of the common pre‐saturation approaches. Thanks to a gradient coil included in our benchtop spectrometer, we were able to implement modern and efficient solvent suppression blocks such as WET or excitation sculpting to deliver quantitative spectra in the conditions of the on‐line monitoring. While these methods are commonly used at high field, this is the first time that they are investigated on a benchtop setting. Their analytical performance is evaluated and compared under static and on‐flow conditions. The results demonstrate the superiority of gradient‐based methods, thus highlighting the relevance of implementing this device on benchtop spectrometers. The comparison of major solvent suppression methods reveals an optimum performance for the WET‐180‐NOESY experiment, both under static and on‐flow conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

1.55-μm non-anti-reflection-coated fiber grating laser for single-longitudinal mode operation

A 1.55-m fiber grating laser (FGL) was fabricated by optically packaging a non-anti-reflection (AR) coated Fabry–Perot (FP) laser to a lensed fiber grating. The FGL demonstrates a single-longitudinal mode operation with a side-mode suppression ratio (SMSR) of up to 40 dB. The SMSR oscillates and diminishes to <30 dB as the increase of injection current above 38 mA, and the tilt of the fiber approaches 5° away from the facet normal of the FP laser. We have performed numerical simulations on the single-longitudinal mode operation for the FGL. The SMSR for the FGL increases over 40 dB as the increase of the fiber grating reflectivity (R _g) above 0.7 with non-AR-coated FP laser facet. Our calculations also show that the strong current-dependent SMSR oscillation is from the mode selection by the fiber grating external cavity and the heating effect in the FP laser.     

Ermittlung von Fließkurven in verschiedenen Ausführungsformen des Stauchversuches

Several modifications of the upsetting test at room temperature are discussed under the aspect of suppressing friction and other possible sources of error.In the upsetting test according to Rastegaev, friction is reduced, and the testpiece remains cylindrical up to high strains, however the specimen's height is determined with a large error. Therefore it is proposed to measure the increase of the specimen's diameter instead of the reduction of height.Upsetting under sticking friction conditions can formally be treated like upsetting with lubrication for calculating the stress-strain curve. However, the applicability and the limits of this method have not yet been studied sufficiently.In the plane-strain upsetting test, friction is not suppressed completely, but the error of height measurement propagates only weakly into the calculated stress-strain curve.

     

Determination of pore space shape and size in porous systems using NMR diffusometry. Beyond the short gradient pulse approximation

The influence of finite length gradient pulses on NMR diffusion experiments on liquids confined to diffuse between two parallel planes is investigated. It is experimentally verified that the pore size decreases when determined using finite gradient pulses if the results are analyzed within the short gradient pulse approximation. The results are analyzed using the matrix formulation. The observed minima in the echo decay profiles are considerably less sharp than theoretical analysis would indicate and we suggest that this is due to the presence of a distribution of pore sizes in the sample. In addition, effects due to the presence of background gradients are discussed. It is argued that effects due to the finite length gradient pulses are relatively minor and in realistic applications the effects due to inhomogeneities in pore sizes and effects due to background gradients will constitute more serious problems in pore size determinations by means of NMR diffusometry.     

光纤光栅对FBG-ECL静态特性的影响

光纤光栅外腔半导体激光器(FBG-ECL)在未来光通信系统占有着越来越重要的地位。根据FBG-ECL的等效腔模型,讨论了光纤光栅反射率、带宽对FBG-ECL的输出功率,阈值特性、边模抑制比等静态特性的影响。指出了存在最佳光纤光栅峰值反射率,不仅使得FBG-ECL具有更高的输出功率,而且可以获得极好的边模抑制比。最后根据实测在不同反射率下外腔激光器的激射光谱,发现理论分析结果和实验数据是吻合的。     

First nucleation steps during deposition of SiO2 thin films by plasma enhanced chemical vapour deposition

The initial nucleation stages during deposition of SiO₂ by remote plasma enhanced chemical vapour deposition (PECVD) have been monitored by XPS inelastic peak shape analysis. Experiments have been carried out on two substrates, a flat ZrO₂ thin film and a silicon wafer with a native silicon oxide layer on its surface. For the two substrates it is found that PECVD SiO₂ grows in the form of islands. When the SiO₂ particles reach heights close to 10 nm they coalesce and cover completely the substrate surface. The particle formation mechanism has been confirmed by TEM observation of the particles grown on silicon substrates. The kinetic Monte Carlo simulation of the nucleation and growth of the SiO₂ particles has shown that formation of islands is favoured under PECVD conditions because the plasma species may reach the substrate surface according to off-perpendicular directions. The average energy of these species is the main parameter used to describe their angular distribution function, while the reactivity of the surface is another key parameter used in the simulations.